本文介绍了在离线环境中部署Harbor镜像仓库的完整流程。首先通过脚本创建多个Harbor项目，然后使用KubeKey工具将预打包的Kubernetes镜像(kubesphere.tar.gz)推送到Harbor仓库。接着配置containerd以支持从私有仓库拉取镜像，包括设置TLS证书和镜像仓库端点。最后解决Kubernetes 1.26.12安装过程中pause镜像的拉取问题，通过重命名本地镜像的方式替代原本需要从registry.k8s.io获取的pause镜像。整个过程涉及Harbor项目创建、镜像推送、containerd配置和镜像重命名等关键步骤。
离线部署Harbor，详见我另外一篇博客《k8s:docker compose离线部署haborV2.13.1及采用外部的postgresql及redis数据库》
一、创建 harbor 项目
#cd /app/KubeSphere/setup
vi create_project_harbor.sh
#!/usr/bin/env bash
# Copyright 2018 The KubeSphere Authors.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.url="https://dockerhub.kubekey.local" # 或修改为实际镜像仓库地址
user="admin"
passwd="Harbor12345"harbor_projects=(
ks
kubesphere
kubesphereio
coredns
calico
flannel
cilium
hybridnetdev
kubeovn
openebs
library
plndr
jenkins
argoproj
dexidp
openpolicyagent
curlimages
grafana
kubeedge
nginxinc
prom
kiwigrid
minio
opensearchproject
istio
jaegertracing
timberio
prometheus-operator
jimmidyson
elastic
thanosio
brancz
prometheus
)for project in "${harbor_projects[@]}"; do
echo "creating $project"
curl -u "${user}:${passwd}" -X POST -H "Content-Type: application/json" "${url}/api/v2.0/projects" -d "{ \"project_name\": \"${project}\", \"public\": true}" -k # 注意在 curl 命令末尾加上 -k
done
#chmod +x create_project_harbor.sh
./create_project_harbor.sh
二、推送到harbor仓库(时间比较久）
#cd /app/KubeSphere/setup
./kk artifact image push -f config-sample.yaml -a /app/KubeSphere/setup/kubesphere.tar.gz
./kk：KubeKey 是一个用于部署 Kubernetes 和 KubeSphere 集群的工具。
artifact image push：KubeKey 的子命令，专门用于推送预先打包好的 Kubernetes 或 KubeSphere 镜像到指定的镜像仓库。
-f 参数用于指定配置文件路径。
config-sample.yaml 集群准备的配置文件，其中包含了关于如何连接到私有镜像仓库的信息（如认证信息、仓库地址等），以及其他与集群相关的配置。
-a 参数用于指定本地的镜像归档文件路径。
/app/KubeSphere/setup/kubesphere.tar.gz 是生成的包含所有必要镜像的压缩包。这个文件通常包含了搭建 Kubernetes 或 KubeSphere 所需的所有 Docker 镜像，
注：kubesphere.tar.gz 的构建，详见《K8s:离线部署Kubernetes1.26.12及采用外部Harbor》的第二章。
三、编辑 containerd 的配置文件（通常位于 /etc/containerd/config.toml）：
为了保证通过crictl能从harbor拉取jar，需要进行如下配置：
vi /etc/containerd/config.toml
disabled_plugins = []
[plugins."io.containerd.grpc.v1.cri"]
enable_selinux = false
selinux_category_range = 1024
disable_seccomp = true
sandbox_image = "172.23.123.117:8443/kubesphereio/pause:3.9"
[plugins."io.containerd.grpc.v1.cri".registry]
[plugins."io.containerd.grpc.v1.cri".registry.configs]
[plugins."io.containerd.grpc.v1.cri".registry.configs."172.23.123.117:8443"]
tls = true
cert_file = "/etc/containerd/certs.d/172.23.123.117:8443/172.23.123.117.cert"
key_file = "/etc/containerd/certs.d/172.23.123.117:8443/172.23.123.117.key"
ca_file = "/etc/containerd/certs.d/172.23.123.117:8443/ca.crt"
skip_verify = false
[plugins."io.containerd.grpc.v1.cri".registry.mirrors]
[plugins."io.containerd.grpc.v1.cri".registry.mirrors."registry.k8s.io"]
endpoint = ["https://172.23.123.117:8443"]
[plugins."io.containerd.grpc.v1.cri".registry.mirrors."docker.io"]
endpoint = ["https://172.23.123.117:8443"]
重启
sudo systemctl daemon-reload
sudo systemctl restart containerd
四.增加registry.k8s.io/pause
在安装Kubernetes1.26.12时，需要registry.k8s.io/pause，因为是离线环境，所以手动构建.
从私有库拉取3.9版本的pause
crictl pull 172.23.123.117:8443/kubesphereio/pause:3.9
通过打标签方式，将3.9版本的pause变成 registry.k8s.io/pause:3.8,从而解决离线环境拉取不到 registry.k8s.io/pause:3.8的问题。
ctr -n=k8s.io image tag 172.23.123.117:8443/kubesphereio/pause:3.9 registry.k8s.io/pause:3.8
 完结篇！！！)
RT-THREAD版)
